Jean Creasing Presses | Malkan Ütü Ve Pres

FK2 NET WRINKLE MACHINE WITH DOUBLE PISTONS

baris — Wed, 18 Dec 2019 19:25:21 +0000

* Mesh creasing machine has one horizontal piston.
* Working part is 304 quality CrNi stainless steel.
* Stylish and ergonomic design.
* Employee safety is at the forefront.
* Trousers or coats can be netted.
* Since the netting process can be done easily, it does not require sensitive employees.
* It does not need electricity for its operation.
* Works with air only.
* Sturdy construction and ergonomic to use.
* Conforms to CE norms.

The post FK2 NET WRINKLE MACHINE WITH DOUBLE PISTONS first appeared on Malkan Ütü Ve Pres.

FK1 NET WRINKLE MACHINE

baris — Wed, 18 Dec 2019 19:24:54 +0000

* Mesh creasing machine has one horizontal piston.
* Working part is 304 quality CrNi stainless steel.
* Stylish and ergonomic design.
* Employee safety is at the forefront.
* Trousers or coats can be netted.
* Since the netting process can be done easily, it does not require sensitive employees.
* It does not need electricity for its operation.
* Works with air only.
* Pants or coats are put in the hopper.
* Horizontal piston pushes the work to the side and compresses it into the net.
* Sturdy construction and ergonomic to use.
* Conforms to CE norms.

The post FK1 NET WRINKLE MACHINE first appeared on Malkan Ütü Ve Pres.

UPP36 PNEUMATIC, VERTICAL SYSTEM TROUSERS WRINKLE PRESS (TWO UNITS)

baris — Wed, 18 Dec 2019 19:24:29 +0000

* It works with 380 V electricity.
* It is used to make permanent wrinkles on the waist, body, flanks and back of the jeans.
* The upper molds are heated with 2×1.5 kW power resistance and digital thermostat control. .
* Pressure adjustment is made with pneumatic regulator.
* The compression process is time adjusted.
* Sturdy construction and ergonomic to use.
* It is produced according to CE norms.
* There is a safety frame system for operator safety.

The post UPP36 PNEUMATIC, VERTICAL SYSTEM TROUSERS WRINKLE PRESS (TWO UNITS) first appeared on Malkan Ütü Ve Pres.

UPP352 PNEUMATIC HORIZONTAL SYSTEM TROUSERS LEG AND WAISTBAND WRINKLE PRESS WITH DOUBLE APPARATUS

baris — Wed, 18 Dec 2019 19:24:01 +0000

* It works with 220 V single phase electricity.
* It is used to make permanent wrinkles on the waist, body, flanks and back of the jeans.
* The creasing apparatus has 2×0.3 kW power resistance heating and is digital thermostat controlled.
* The creasing apparatus is made of 304 quality Cr-Ni stainless steel.
* Pressure adjustment is made with pneumatic regulator.
* The compression process is time adjusted.
* Sturdy construction and ergonomic to use.
* It is produced according to CE norms.

The post UPP352 PNEUMATIC HORIZONTAL SYSTEM TROUSERS LEG AND WAISTBAND WRINKLE PRESS WITH DOUBLE APPARATUS first appeared on Malkan Ütü Ve Pres.

UPP35 PNEUMATIC HORIZONTAL SYSTEM TROUSERS LEG AND WAISTBAND WRINKLE PRESS

baris — Wed, 18 Dec 2019 19:23:28 +0000

* It works with 220 V single phase electricity.
* It is used to make permanent wrinkles on the waist, body, flanks and back of the jeans.
* The creasing apparatus has a resistance of 0.3 kW and has a digital thermostat control.
* The creasing apparatus is made of 304 quality Cr-Ni stainless steel.
* Pressure adjustment is made with pneumatic regulator.
* The compression process is time adjusted.
* Sturdy construction and ergonomic to use.
* It is produced according to CE norms.

The post UPP35 PNEUMATIC HORIZONTAL SYSTEM TROUSERS LEG AND WAISTBAND WRINKLE PRESS first appeared on Malkan Ütü Ve Pres.

UPP34 PNEUMATIC VERTICAL SYSTEM, TROUSERS WRINKLE PRESS (TWO UNITS)

baris — Wed, 18 Dec 2019 19:23:01 +0000

* Works with single phase 220 V electricity.
* Top molds are made of 304 quality CrNi Stainless steel,
* Upper mold resistance power is 4×1 Kw and thermostat controlled.
* Central system works with steam, vacuum, air and electricity.
* It is used to make permanent wrinkles on the legs of the jeans and the sleeves of the jackets.
* The lower jaw is heated by steam.
* It makes only vacuum from the lower jaw and does not spray steam.
* Precise heat adjustment can be done thanks to the digital thermostat.
* Sturdy construction and ergonomic to use.
* It is produced according to CE norms.
* Micro processor controlled, automatically closes, opens
* Fine pressure adjustment is made with the help of the regulator.
* There is a safety frame system for operator safety.

The post UPP34 PNEUMATIC VERTICAL SYSTEM, TROUSERS WRINKLE PRESS (TWO UNITS) first appeared on Malkan Ütü Ve Pres.

UPP32 PNEUMATIC, SCISSORS SYSTEM TROUSERS WRINKLE PRESS

baris — Wed, 18 Dec 2019 19:22:31 +0000

* Micro processor controlled, automatically closes, opens
* It works with 220 V single phase electricity.
* Upper table resistance power is 2.5 Kw and thermostat controlled.
* Central system works with steam, vacuum and air.
* It is used to make permanent wrinkles on the legs of the jeans and the sleeves of the jackets.
* The upper jaw is electrically heated and at the same time, thanks to the steam chamber, equal heating is provided on all sides of the cover.
* The lower jaw is heated by steam.
* Precise heat adjustment can be done thanks to the digital thermostat.
* Sturdy construction and ergonomic to use.
* It makes vacuuming from the lower mold and gives steam.
* It is produced according to CE norms.
* Fine pressure adjustment is made with the help of the regulator.

The post UPP32 PNEUMATIC, SCISSORS SYSTEM TROUSERS WRINKLE PRESS first appeared on Malkan Ütü Ve Pres.

UPP31 PNEUMATIC, SCISSORS SYSTEM TROUSERS LEG WRINKLE PRESS WITH DOUBLE LOWER BUCKS

baris — Wed, 18 Dec 2019 19:22:03 +0000

* Micro processor controlled, automatically closes, opens
* It works with 380 V electricity.
* Upper table resistance power is 4.5 Kw and thermostat controlled.
* Central system works with steam, vacuum and air.
* It is used to make permanent wrinkles on the legs of the jeans and the sleeves of the jackets.
* The upper jaw is 10mm, 304 quality stainless steel.
* The upper jaw is electrically heated and at the same time, thanks to the steam chamber, equal heating is provided on all sides of the cover.
* The lower jaw is heated by steam.
* Precise heat adjustment can be done thanks to the digital thermostat.
* Sturdy construction and ergonomic to use.
* It makes vacuuming from the lower mold and gives steam.
* It is produced according to CE norms.
* Fine pressure adjustment is made with the help of the regulator.
* Different sizes of work can be done easily thanks to 2 lower jaws.
* There is a safety frame system for operator safety.

The post UPP31 PNEUMATIC, SCISSORS SYSTEM TROUSERS LEG WRINKLE PRESS WITH DOUBLE LOWER BUCKS first appeared on Malkan Ütü Ve Pres.

UPP30 PNEUMATIC, SCISSORS SYSTEM TROUSERS WRINKLE PRESS

baris — Wed, 18 Dec 2019 19:21:17 +0000

* Micro processor controlled, automatically closes, opens
* It works with 380 V electricity.
* Upper table resistance power is 4.5 Kw and thermostat controlled.
* Central system works with steam, vacuum, air and electricity.
* It is used to make permanent wrinkles on the legs of the jeans and the sleeves of the jackets.
* The upper jaw is 10mm, 304 quality stainless steel.
* The upper jaw is electrically heated and at the same time, thanks to the steam chamber, equal heating is provided on all sides of the cover.
* The lower jaw is heated by steam.
* Precise heat adjustment can be done thanks to the digital thermostat.
* Sturdy construction and ergonomic to use.
* It makes vacuuming from the lower mold and gives steam.
* It is produced according to CE norms.
* Fine pressure adjustment is made with the help of the regulator.
* There is a safety frame system for operator safety.

The post UPP30 PNEUMATIC, SCISSORS SYSTEM TROUSERS WRINKLE PRESS first appeared on Malkan Ütü Ve Pres.